1、 Equipment Overview

Hammer crusher is a universal crushing equipment based on the principle of high-speed rotating hammer impact crushing, mainly used for material crushing in the fields of feed processing, grain processing, biomass energy, and chemical raw materials. Its core structure consists of a rotor assembly, hammer blades, screen mesh, and transmission system. Through the collision, shearing, and friction between the hammer blades and the material, efficient crushing is achieved, which is suitable for the coarse and fine crushing needs of various raw materials such as corn, straw, sawdust, and ore. The crushing particle size range is wide (0.5-10 mm), and it has the characteristics of high production capacity and strong adaptability.

2、 Core Technology Highlights

1. Dynamic crushing optimization

Adopting a symmetrical staggered arrangement of hammer blades design, there is no dead angle impact on the material in 360 °, and the crushing efficiency is increased by more than 15%.

The mesh aperture can be quickly replaced (0.8-12 mm), and supports flexible switching between coarse, medium, and fine multi-stage crushing modes.

2. Wear resistant and impact resistant design

The surface of the hammer is welded with a tungsten carbide alloy layer, with a hardness of HRC60 or higher, and the service life is extended to three times that of ordinary steel.

The spindle undergoes quenching and tempering heat treatment, combined with high-strength bearing seats, to ensure the stability of the equipment under high-speed and heavy loads.

3. Intelligent security protection

Equipped with overload protection device, it automatically cuts off the power supply in case of abnormal current to avoid motor burnout.

Fully enclosed structure+pulse dust removal interface, effectively controlling dust overflow and complying with environmental production standards.

3、 Typical application scenarios

Feed processing: Crush raw materials such as corn and soybean meal to improve mixing uniformity and animal digestion rate.

Biomass pellets: Crush straw and wood chips to a particle size of 3-5 mm, suitable for pellet fuel molding machines.

Chemical raw materials: Processing hard materials such as ore and gypsum to meet the requirements of primary crushing processes.

• Renewable resources: Crushing waste plastics and rubber products to achieve resource recycling.

In short, the hammer crusher, with its simple structure, convenient maintenance, and wide material adaptability, has become the main model in modern crushing technology, continuously promoting the efficient utilization of resources and technological upgrades in agriculture and industry.