Micro pulverizers are particularly suitable for micro pulverization of brittle materials, with a hardness of 1-3 on the Mohs scale, such as non-metallic minerals such as graphite, kaolin, and white carbon black. Due to its high rotational speed and large air intake, the micro grinder is suitable for crushing heat sensitive materials such as synthetic resins, sulfur, pesticides, food, Chinese herbs, phosphates, magnesium carbonate, and other items.

Micro crushing technology is a new technology developed in the past 20 years. The so-called micro crushing refers to the use of mechanical or fluid power methods to overcome the internal cohesion of solids and crush them, thereby crushing material particles larger than 3 millimeters to 10-25 microns. The operation technology is a high-tech material processing technology that emerged after the 1970s to adapt to the development of modern high-tech.

Beijing Chuangchuang Tonghe has been engaged in the production and sales of equipment for traditional Chinese medicine micro crushers, pharmaceuticals, food chemicals, agriculture, environmental protection and other industries for more than ten years. Our company adheres to the corporate spirit and business philosophy of "creating great achievements and cultivating benevolence together". Over the years, we have established good cooperative relationships with many domestic research institutions, colleges and universities, enterprises, and industry colleagues. With a ten-year factory maintenance, you can rest assured to purchase.

After using the micro grinder for a period of time, the temperature may gradually increase, and many customers have reported to our micro grinder manufacturer that they do not know how to control the temperature of the micro grinder.

The heat generated by factors such as collision and friction between machinery and materials. The manufacturing process of the micro grinder is excellent, and the heat generated by the friction of the machinery itself can be ignored; And its crushing principle is clever, relying on rolling and grinding, not hard impact shearing. In addition, its own speed is relatively low (only 285r/min), so the heat generated is much lower than other crushers. What's even more clever is that the sorting airflow of the micro crusher directly passes through the crushing tank, and while sorting, it takes away most of the heat. Therefore, the continuous operation of the micro crusher will not have a high temperature. In actual measurements, the wall temperature of a continuously running micro grinder will not exceed 55 degrees, and the powder temperature will not exceed 45 degrees. However, in a small and enclosed environment, if the air is not circulated, heat cannot be conducted out, and the limited air is heated time and time again. When the indoor air temperature reaches over 50 degrees, it will cause the micro grinder to dissipate heat slowly. This requires customers to rearrange the machine and install ventilation facilities, which can solve this problem well. Therefore, before installation, it is important to explain to customers the importance of ventilation for normal operation.

Safe use:

1. Before use, check whether the feet of the crusher equipment are firmly and steadily on the ground, whether the screws are locked, and whether the filter screen is intact. Only after a comprehensive inspection is carried out and there are no problems, can it be started.

2. Turn on the power switch and when the indicator light is on, the machine can be started. At the same time, observe the operating current and the condition of the operation. If there are any problems, stop the machine immediately and conduct inspection and maintenance.

3. The feeding can only begin after the crusher is running normally. The speed should not be too fast, the amount should not be too large, and the material should not be too large or too coarse.

4. During the crushing process of the crusher, if there are any abnormalities, the machine should be stopped immediately for maintenance, and then the maintenance should be carried out. (2) After the material is crushed, it is loaded into the transfer bucket. After the bucket is full, cover it with a lid to prevent the material from absorbing moisture.