50L 3D mixer video

3D mixer

1. Introduction to 3D mixer:

Three dimensional mixer is used for high uniformity mixing of powdered and granular materials in pharmaceutical, chemical, food, light industry, electronics, machinery, mining and metallurgy, national defense industry, and various scientific research units; Can mix granular materials with good flowability very evenly, so that the mixed material can reach a qualified mixing state.

2. Characteristics of 3D mixer:

The mixing cylinder of the 3D mixer moves in multiple directions, with no centrifugal force on the material, no specific gravity segregation or layering, and no accumulation phenomenon. The components can have significant weight ratios, and the mixing rate can reach over 99.9%. It is currently an ideal product among various mixers; The cylinder for loading materials is driven by the active shaft to perform a compound motion of cyclic translation, rotation, and rolling, which promotes the material to undergo a three-dimensional compound motion along the cylinder in the circumferential, radial, and axial directions, thereby achieving the mutual flow, diffusion, accumulation, and doping of various materials to achieve uniform mixing.

Due to the multi-directional movement of the mixing cylinder, the materials inside the cylinder are mixed in a staggered manner, resulting in high mixing efficiency and uniformity. The full load loading coefficient can reach 0.8, with short mixing time and high efficiency. The design of the mixing cylinder of this machine is *, and the inner wall of the cylinder is finely polished, *, which does not pollute the material, is easy to discharge, easy to clean, and easy to operate.

3. Working principle of 3D mixer:

The cylinder for loading materials is driven by the active shaft to perform a compound motion of cyclic translation, rotation, and rolling, which promotes the material to undergo a three-dimensional compound motion along the cylinder in the circumferential, radial, and axial directions, thereby achieving the mutual flow, diffusion, accumulation, and doping of various materials to achieve uniform mixing.

The machine consists of a base, a rotating system, an electrical control system, a multi-directional motion mechanism, a mixing bucket, and other components. The mixing bucket in contact with the material is made of stainless steel material, and the inner and outer walls of the cylinder are polished.

4. Technical parameters: