When using a wall breaking ultrafine crusher, safety issues are crucial. Here are some key things to pay attention to:

1. Equipment inspection and preparation

Cleaning inspection: Before use, ensure that the wall breaking ultrafine crusher has been cleaned and check if the equipment has a "cleaning certificate". Equipment that has not been cleaned or inspected shall not be put into use.

Lubrication and cooling: Check the oil level in the manual dry oil pump to ensure sufficient lubricating oil to ensure the lubrication of the roller bearings. Meanwhile, check if the cooling water is turned on.

Equipment integrity: Ensure that there are no maintenance tools or other tools on the roller surface or equipment to avoid accidents caused by these items entering between the two rollers.

2. Safety precautions during operation

Start and idle: Before starting the device, run it idle for 1-2 minutes to confirm that there are no abnormal conditions before proceeding with normal operation.

Avoid direct contact: When the equipment is in operation, it is strictly prohibited to extend hands, heads, or tools beyond the warning pole between the two rollers. If foreign objects are found on the roller surface, the machine should be stopped for further processing, and do not directly pick up the object by hand.

Emergency stop: If an accident occurs during the operation of the machine, the emergency stop button should be pressed immediately. The emergency brake switch should only be used in emergency situations and should not be used as a general stop button.

3. Maintenance and Cleaning

Shutdown maintenance: During shutdown maintenance or cleaning, the power should be cut off and a dedicated person should be arranged to supervise to avoid accidents caused by accidental startup.

Cleaning procedure: Clean the equipment according to the cleaning procedure to ensure that the surface and interior of the equipment are clean.

Regular maintenance: According to the maintenance and repair procedures of the equipment, regularly inspect each component of the equipment to ensure its normal operation.

4. Use environment and placement

Stable placement: The wall breaking ultrafine crusher should be placed on a flat and stable table, away from the edges, to avoid equipment movement or falling due to vibration.

Avoid moisture and high temperature: The equipment should not be placed in damp or near fire or heat sources, and should be kept at least 30 centimeters away from the heat source.

5. Power Supply and Electrical Safety

Power supply inspection: Ensure that the power supply voltage is consistent with the equipment requirements and avoid using unqualified sockets or power cords.

Avoid wet operation: Do not insert or remove the power plug with wet hands to avoid electric shock or short circuit.

Professional maintenance: If the power cord or other electrical components are damaged, they must be replaced by professionals.

6. Precautions after use

Timely cleaning: After use, parts that come into contact with food should be cleaned immediately to avoid prolonged storage that may cause odors.

Power off storage: After use, promptly unplug the power plug to avoid safety hazards caused by prolonged power on.

By strictly adhering to these safety precautions, the risk of using a wall breaking ultrafine crusher can be effectively reduced, ensuring the stable operation of the equipment and the safety of the operators.