Different models of osmometers

1. Testing ability:24bit

2. Multi volume osmometer, sample volume200μlOr more

3. The detection time is approximately2minute/sample

4. Resolution: The output print result has an accurate osmotic pressure value1mOsm

5. Detection range:0-2500mOsm/kgH2O

6. essence indeed degree(YASNStandard liquid)：±3，0-400 mOsm/kg H2O；±1%，400-2500mOsm/kgH2O

7. heavy again sex(YASNStandard liquid)：SDValue ≤3，0-400mOsm/kgH2O；CV≤1%，400-2500mOsm/kgH2O

8. ※Ultra cold measurement technology: By instantly crystallizing through a three-stage cold trap and inducing supercooled samples to reach the plateau stage,There is no noise generated during the measurement process due to the impact of refrigeration or stirring needles, ensuring measurement accuracy and repeatability, and providing users with an ultra quiet working environment.

9. Injection method: The injection and sample volume are precisely controlled by an automatic injection needle system, without the need for a pipette, to prevent measurement errors caused by operational errors or volume differences and ensure the accuracy of the results.

10. ※Free calibration function：(100mosm/700mosm/2000mosm)The osmotic pressure value of the sample is roughly known—customize2Point calibration: using known concentrations2Seed solution (low)/The higher the concentration range, the more accurate the data.

11. ※Closed probe design(Probe not exposed, free warranty3year)The sample probe is hidden, and there is no need to wipe the probe after measurement, reducing cross contamination between samples; Closed design and no need for wiping greatly reduce probe failure rate and lower equipment operating costs.

12. Probe cleaning replaces traditional probe wiping to prevent cross contamination: special cleaning solution is used to clean the pipeline and detection components between two detections, fundamentally eliminating cross contamination and improving the repeatability of the equipment. The cleaning solution is concentrated and the cost of consumables is low.

13. Emergency detection: In the measurement process, if an emergency sample is encountered, it needs to be tested immediately and supports queue jumping function. Interrupt the ongoing measurement and test the emergency sample first. After the measurement is completed, the system will restart the routine sample automatic detection.

14. ※Data Security and Traceability: No need for external devices, single machine implementation of data security function support21 CFR Part 11 & EU Annex 11 Compliance(Data restoration, electronic signature, equipped with network port,USB，RS232， ）

15. ※After the sample testing is completed, the test results can be printed, includingOsmo-DTest result value, time, dateUserTheSample ID

16. ※The standalone device is capable of storing the most recent measurements10Ten thousand data points, the measured data cannot be changed or deleted.

※No need for any external devices, the single machine has five levels of permissions and can be set to at least1000An independent account, password permissions, etc., with different operation controls achieved through account permission levels, enabling password login.