How to properly store and operate mouse ELISA kits?

1. The mouse ELISA kit should be balanced at room temperature for 15-30 minutes before being taken out from the cold storage environment. If the enzyme coated plate is not used up after opening, the Flat noodles should be stored in a sealed bag.

2. The concentrated washing solution may crystallize, and when diluted, it can be dissolved by heating in a water bath without affecting the results during washing.

3. Sample dispensers should be used for each step of sample addition, and their accuracy should be regularly calibrated to prevent experimental errors. The sample addition time should be controlled within 5 minutes. If there are a large number of specimens, it is recommended to use a sampling gun for sample addition.

4. Please make a standardized curve and repeat the hole for each measurement. If the content of the substance to be tested in the specimen is too high, please dilute it with the sample diluent by a certain multiple (n times) before measuring. When calculating, please multiply it by the total dilution multiple (x n x 5).

5. The sealing film is only for one-time use, and the mouse ELISA kit is used to prevent cross contamination.

In the protection of experimental instruments, friends also need to pay attention to the working environment of the instruments: it has a great impact on the performance, reliability, measurement results, and lifespan of fine detection instruments. Requirements: dustproof, moisture-proof, heat-resistant, shockproof, and corrosion-resistant.

The operation process of the rat ELISA kit test instrument

(1) Monotony: Don't worry, the instrument can be placed on a clean and natural monotonous shelf.

(2) Worried that the instrument can be used for monotonous airflow on glass surfaces (60 × 70 ℃).

(3) Measuring glass instruments should have natural drainage and should not be baked.

A piece of paper used on the plug pad to store the grinding instrument and prevent any delays.

When the glass instrument is stored: it can be set up and stored in the inspection box, can be safely placed, the instrument height is high, and inside.

When carefully cleaned and selected, it is difficult for the rat ELISA kit to achieve the expected results.

Measuring instruments (such as glass burettes, liquid transfer tubes, bottles, etc.): Clean with soap or laundry detergent, but not with a brush.

General glassware (such as flasks, beakers, etc.): First use tap water and laundry detergent, then clean with a brush, then clean with clean water, and rinse with purified water three times (should be shaken along the toilet wall to achieve the washing effect).

The ELISA kit cleaning equipment requires washing hands with soap to prevent oil from sticking to the instrument and cleaning the wall, which increases the difficulty of cleaning.

Clean glassware should not hang water droplets (inverted instrument, water wall should not hang water droplets).

Precision or difficult to clean glassware (burette, straw, volumetric flask, colorimetric tube, glass sintering funnel): Clean with tap water, drainage, and chromic acid cleaning solution for a period of time (usually left), then rinse with tap water and purified water three times.

Attention: The above information is for reference only and is not considered actual data. Experiments must strictly follow the instructions or consult technical teachers.

Tianjin Bensheng has always regarded quality control as the lifeblood of the enterprise and pursued continuous improvement of its competitiveness. The company always adheres to the corporate spirit of abiding by laws and regulations, being strict with oneself, being tolerant and willing to take on responsibilities as the standard in its operations. It maintains and expands the market with excellent quality and service, and maximizes the satisfaction of customer needs. Our development goal is to achieve mutual benefit with our customers. This student! A partner you trust. We are willing to cooperate sincerely with you and create a better future together.