capsule filling machineIntegrating machinery, electricity, and gas, it adopts a microcomputer programmable controller, touch panel operation, variable frequency speed regulation, and is equipped with an electronic automatic counting device. It can automatically complete the actions of capsule positioning, separation, filling, locking, etc., reducing labor intensity, improving production efficiency, and meeting pharmaceutical hygiene requirements. This machine is sensitive in action, accurate in filling dosage, easy to operate, and suitable for filling various domestic or imported capsules. It is currently an economical and practical equipment for filling capsule drugs in the pharmaceutical industry.
Below, the editor will briefly introduce itcapsule filling machineThe common faults and solutions are as follows:
1. Too many inverted capsule shells (more than 3%), improper adjustment of the vibrator, due to adjusting the appropriate voltage or capsule shell size not meeting specifications, qualified capsule shells should be selected.
2. The guide plate in the mold is worn, which affects the low fitting rate of the capsule. Replace the mold with a new one or loosen the positioning on both sides. Tighten the positioning nails. If the capsule is deformed or damp, replace the capsule shell.
3. The capsule shells are arranged in the workbench, with the mouth raised or lowered, and the height of the misalignment plate and guide rail are adjusted.
4. The mold cannot be reset in the track, and the pressure spring at the back of the guide rail is stuck or the capsule is deformed and stuck. Reinstall the spring or top rod, and push the push rod down to clamp the capsule.
5. The vibration is not ideal, adjust the voltage.
6. Loosen the H-plate screw and tighten the screw.
7. The capsule shell is stuck on the table and cannot fall. Replace the capsule shell or adjust the position of the misalignment plate and the table hole.
Through the above content, we hope it will be helpful for everyone to operate the capsule filling machine.