During the process of selecting a dropping pill machine, it is important to pay attention to some important parameters, such as the monomer quality and production volume of the dropping pills.

　　At present, there is no unified production standard for drip pill machines in China. You can first submit technical requirements and parameters to the drip pill machine manufacturer. The manufacturer will provide you with some equipment selection options and then compare them. There is a certain gap in the overall design of the drip pill machine, as it operates in a cold and hot exchange state. Ensuring that the equipment works in both cooling and heating is an important parameter when selecting a drip pill machine. While ensuring the necessary parameters of the drip pills, the main focus is on comparing the humanized design of the equipment, whether the operation and control are convenient, the range of power consumption and noise, the adaptability of environmental temperature, the main configuration of the equipment, and the service commitment of the manufacturer. If you have time, experienced operators and technicians can come to the site to observe these issues. After comparison, the equipment you have chosen will be good.

Precautions

1. Warning: Generally, drop pill machines are designed with pressure feeding or pressure dripping, and the dripping material needs to be heated and dissolved. If the temperature of the container is too high, attention should be paid to burns. Sealed containers are designed with pressure relief devices. Before opening the sealed container, the pressure relief device should be opened first, and then other operations should be carried out to avoid danger.

2. Operation tip: Before using the drip pill equipment, it is necessary to master the operating principle of the equipment according to the instructions in the manual. If there are any doubts, the manufacturer should be consulted in a timely manner, and the equipment should not be operated without doubts.

3. Operating instructions: First, turn on the coolant pump and then turn on the refrigeration unit. At the same time, turn on the required heating device. When the required temperature reaches a stable value, add the dripping substance that has reached the dripping state into the dripping tank. At the same time, adjust the gap between the liquid level of the cooling column and the dripping nozzle. The adjustment of the gap is the key to ensuring the quality of the dripping pills. After each dripping is completed, first turn off the heating and cooling system: observe that all the dripping pills in the system have flowed out, then turn off the cooling circulation system to prevent residual dripping pills. After each drip is completed, residual substances must be removed, and all pipeline containers and coolant filters that have come into contact with the drip before solidification must be cleaned.