1、 Modular design and advantages of man-machine cooperation

The TDP series adopts a combination structure of cast iron body and stainless steel components, and the punching die can be replaced within 10 seconds through a quick release chuck during loading and unloading. Its core innovation lies in:

Dual mode drive: The 0.55kW motor supports electric compression of 4000 pieces per hour, and can switch to manual mode to continue operation in case of sudden power failure, ensuring uninterrupted critical production;

• Three dimensional adjustment system: independently controls filling depth (0-15mm), tablet thickness (2-6mm), and pressure (maximum 50 kN), suitable for materials of different densities such as traditional Chinese medicine powder and catalysts;

• Safety protection mechanism: Overload automatic shutdown and mechanical anti top car design to avoid mold damage caused by overpressure operation.

2、 Multi industry precise adaptation solution

1. Pharmaceutical field

Specially optimized for laboratory and small batch production, we compress plain and sugar coated substrates with a diameter of 4-12mm, with a disintegration time limit qualification rate of over 99%. Traditional Chinese medicine powder can be processed with pre mixed adhesive to achieve non fragmented molding.

2. Food and Chemical Industry

When processing milk powder slices and seasoning blocks, the stainless steel contact surface meets the food grade GB 4806 standard; In the compression of catalyst sheets, the corrosion resistance of the mold steel extends its service life by more than three times.

3. Electronic metallurgy

Customized tungsten steel stamping dies can press button battery electrode sheets, and with the help of a vibrating feeder, can achieve a continuous output of 5000 sheets per hour.

3、 Key points of operation and maintenance technology

Mold maintenance: Clean the residual mold holes every 8 hours and apply food grade grease every week to prevent adhesion;

• Material pretreatment: The moisture content should be ≤ 8%, and large particle raw materials should be crushed to above 80 mesh to avoid pressure fluctuations;

Upgrade potential: Optional PLC control system can be used to achieve pressure digital display and batch counting, meeting GMP document traceability requirements.