The automatic filling and capping machine is suitable for the filling, semi capping, or full capping of antibiotic penicillin bottles. The machine adopts a sophisticated rotary plunger pump and rotary plugging method, synchronous V-block linear conveying, servo motor control, sophisticated programmable logic controller (PLC), human-machine interface (touch screen), and can automatically complete bottle sorting, bottle transportation, quantitative filling, capping, feeding, capping and other processes. The components are easy to disassemble and install, and easy to clean and disinfect.
The precautions for using the automatic filling and plugging machine mainly include the following aspects:
Equipment inspection: Before starting up, it is necessary to check whether the equipment identification plate is "normal" and confirm that there is no air leakage. At the same time, check whether there is any leakage in the power cord and plug. If any is found, replace the power cord and plug in a timely manner.
Preparation before operation: Turn on the power switch of the equipment, start the vacuum pump, place the filling peristaltic pump tube into the peristaltic pump and connect it properly, and empty the air in the pipeline. Adjust the filling volume to the specified value, input the peristaltic pump speed value, and flush the pipeline.
Safe operation: During the operation, be careful not to use tools or other unrelated objects to come into contact with the filling machine. Non professional operators and maintenance personnel are not allowed to approach the filling machine to prevent danger.
Equipment maintenance: Regularly inspect and maintain equipment to ensure its normal operation and extend its service life. Check for severe wear or malfunction of each component and promptly address it.
Cleaning and maintenance: After use, the equipment is automatically cleaned to prepare for the next operation. Wear gloves, glasses, and work clothes during cleaning to ensure safety.