2D motion mixer

04.17,20244

Brief Introduction

The two-dimensional mixer consists of three main parts: a rotary drum, a swing frame, and a machine frame. The drum is mounted on the swing frame, supported by four rollers and axially positioned by two gear wheels. Among the four supporting rollers, two transmission wheels are dragged by the rotating power system to rotate the drum. The swing frame is driven by a set of crank swing rod mechanisms, which are mounted on the frame. The swing frame is supported on the frame by bearing components, allowing the rotating drum to participate in swinging while rotating, allowing the materials in the drum to be fully mixed.

feature

1. The second rotation adopts a cycloidal pinwheel reducer or a worm gear reducer. Compared with traditional mixers, it has no material accumulation at the bottom, no pollution, easy flushing, and truly meets GMP requirements.

2. During operation, under the dual action of the rotating mechanism and the swinging mechanism, the loading cylinder rotates while also undergoing swinging motion, allowing the materials inside the cylinder to be fully mixed.

3. The equipment can be equipped with an automatic vacuum feeding machine and interface, which facilitates feeding and shortens operation time. High efficiency and low cost.

4. Two dimensional motion mixer: simple structure, low failure rate, stable operation, safe operation, no noise, easy to clean, in compliance with GMP requirements.

5. The volume is much smaller than the normal standard, occupies less space, and has powerful functions.

Last Video: The high-efficiency wet mixing granulator has the characteristics of high efficiency and fast granulation

Next Video: Experiment on Agar Powder Boiling Drying Machine