The two-dimensional mixer has two degrees of freedom, rotation and up and down swinging, which enables the mixing effect of the materials in the bucket to meet the process requirements. The rotary blade of a two-dimensional mixer can move in two directions simultaneously, one is the rotation of the drum, and the other is the swing of the rotary blade with the swing frame. The mixed material rotates, flips, and mixes with the rotary drum in the rotary mill, while also undergoing left and right back and forth mixing motion with the swing of the rotary mill. Under the combined action of these two motions, the material is fully mixed in a short period of time. This machine is widely used for mixing powder and granular materials.
The two-dimensional mixer is mainly composed of three parts: the rotary drum, the swing frame, and the frame. The rotary drum is mounted on the swing frame, supported by four rollers and axially positioned by two gear wheels. Among the four supporting rollers, two transmission wheels are driven by the rotating power system to rotate the rotary shaft; The swing frame is driven by a set of crank swing rod mechanisms, which are mounted on the frame, and the swing frame bearing components are supported on the frame.
Two dimensional mixers are widely used in industries such as pharmaceuticals, chemicals, food, dyes, feed, fertilizers, pesticides, etc. Especially suitable for mixing various solid materials with large tonnage. The mixing cylinder of this machine participates in swinging while rotating, allowing the materials in the cylinder to be fully mixed. The discharge port of the mixing drum deviates from the centerline of the cylindrical part of the mixing drum, making the machine have the characteristics of rapid mixing, large mixing volume, and convenient discharge.