2D motion mixerIt mainly consists of three parts: the rotary drum, the swing frame, and the machine frame. The drum is mounted on a swing frame, supported by four rollers and axially positioned by two gear wheels. Among the four supporting rollers, two transmission wheels are driven by a rotating power system to rotate the drum. The swing frame is driven by a set of crank swing rod mechanisms, which are mounted on the frame. The swing frame is supported on the frame by bearing components. This machine is widely used for mixing powder and granular materials.

What are the characteristics of a two-dimensional motion mixer? as shown below

1. The equipment can be equipped with an automatic vacuum feeding machine and interface, which facilitates feeding and shortens operation time. High efficiency and low cost.

2. Small size, small footprint, and powerful functionality.

3. The second rotation adopts a cycloidal pinwheel reducer or a worm gear reducer. Compared with traditional mixers, it has no material accumulation at the bottom, no pollution, easy flushing, and truly meets GMP requirements.

4. During operation, under the dual action of the rotating mechanism and the swinging mechanism, the loading cylinder rotates while also undergoing swinging motion, allowing the materials inside the cylinder to be fully mixed.

5. Two dimensional motion mixer: simple structure, low failure rate, stable operation, safe operation, no noise, easy to clean, in compliance with GMP requirements.