Thank you very much for giving our company this opportunity to cooperate with our old customer. Our first cooperation with Youyan Guojinghui New Materials Co., Ltd. was 2 years ago. They bought a constant temperature and humidity test chamber. According to our follow-up customer service feedback, they have a high evaluation of our Liuqin Technology equipment because the equipment failure rate is very low. And our service is also quite up to par. Regularly follow up on customer equipment usage every quarter and provide technical support to customers at any time. Whether it's our equipment or not, we will always provide assistance to our customers in whatever we can do. Therefore, this cooperation naturally chose our Liuqin Technology brand. And it is stated that if the rapid temperature change test chamber is used well this time, additional equipment will be added in the future.

The following are some specifications of the equipment for this cooperation:

Product Name: Rapid Temperature Change Test Chamber (Baking Paint)

Product model: LQ-KS-225D (non-linear, water-cooled)

Size: 500 * 750 * 600mm (W * H * D)

Dimensions (approximately): 1050 * 1850 * 1100mm (W * H * D)

Hole 1: A 200mm diameter hole is opened on the left side of the equipment for installing customer's glass, and a slot is made for the glass card; The center of the hole is 11 50mm above the ground and is equipped with a heating defrosting device

Hole 2: 50mm diameter, located below the hole with a diameter of 200 on the left side for wiring purposes

Add glass door: Glass door. Open 2 holes with a diameter of 130mm on top

Temperature range: -60 ° C~+150 ° C (-40~+80 ° C rapid rise and fall) (water-cooled)

Humidity range: 20%~98% R.H

Cooling rate: Nonlinear heating of 5 ° C/min (unloaded)

Heating rate: Nonlinear cooling of 5 ° C/min (unloaded)