How to solve the malfunction of the simulated transportation vibration table? After purchasing a device, people tend to worry about some degree of malfunction, such as when the device suddenly stops working? What should I do if there is no display on the startup control panel?

The startup control panel is not displayed

Handling method:

1. Check if the control panel switch is burnt out and if the power supply is properly connected, if the power supply voltage is 220V input, and if the wires are properly connected.

2. If the communication signal line connecting the controller and panel has poor contact or falls off, simply press or connect it again.

1. Check if the function switch is pressed to ON.

2. Check if the vertical and horizontal directions of the three-axis sky pass are correct, simply switch to the vertical and horizontal directions.

1. Check if the usage steps are set correctly, and if not, follow the instructions again.

2. Check if the internal code is correct, refer to the parameter table and double check if it is correct.

3. Shut down, set the internal code, and reset the operation steps.

The power switch light is not on

Handling method:

1. Check if the external incoming power supply voltage is input to the power socket, and use a multimeter to measure if the voltage is normal.

2. Check if the fuse of the power socket in the control box has burned out the switch, and replace the fuse or switch.