Guangdong Stainless Steel Goji Leaf Crusher Multi functional Crusher

Guangdong Stainless Steel Goji Leaf Crusher Multi functional Crusher

It is a new type of pulverizer that has been improved on the basis of our company's original ultrafine pulverizer unit. It has no sieve or mesh and is mainly suitable for pulverization needs with a fineness of 100-400 mesh and a large output. Very suitable for high-precision crushing requirements in pharmaceutical, food, and chemical factories.

Advantages:

1、 High output and good effect. This machine adopts a graded crushing method, starting with coarse crushing and then fine powder, which extends the crushing stroke and enables the material to be crushed layer by layer during the flow process, greatly improving work efficiency and crushing fineness.

2、 Pre installed water cooling device, both upper and lower chambers are equipped with water cooling layers, and quick connect connectors are used externally for easy connection of water pipes. Water is used during the crushing process, and the circulation of water carries away the high temperature generated during the work, ensuring the original characteristics of the crushed material, protecting the performance of the machine, and avoiding potential hazards caused by high temperature.

3、 Pulse dust removal device, pulse dust removal is the method of adding compressed air injection to remove dust attached to the filter bag. Depending on the size of the equipment, there will be several sets of pulse valves controlled by a pulse controller. Each time a set of pulse valves is opened, the high-pressure airflow is used to blow back from the inside out to remove the dust on the bag it controls, while the other bags work normally. After a period of time, the next set of pulse valves is opened, and this cycle is repeated. Strong dust cleaning ability, high dust removal efficiency, and small footprint. Extend the cleaning cycle and reduce labor intensity.

4、 Adding an air hammer can lead to material sticking to the walls and poor recovery in many Shackleton collectors, requiring manual tapping and shaking. This not only increases labor but also causes deformation of the Shackleton's appearance, affecting its aesthetics and material collection. This machine is equipped with an air hammer on the outer body of the Shakron, which automatically strikes at regular intervals, making material collection smoother and saving time and effort.