1、 Bottle tray maintenance
1. Check if the transition plate between operation and bottle entry/exit is smooth to avoid bottle tipping.
2. Clean the worn or blackened areas on the surface, and replace the bottle tray in severe cases.
3. Check if the motor reducer is abnormal, add oil or replace it in a timely manner.
2、 Bottle group maintenance
1. Adjust the speed of the mesh belt and the gap between the winches to prevent bottle breakage or blockage.
2. Check the wear of the winch and pulley, and replace severely worn parts.
3. Ensure that the bottom rail is smoothly connected and the bottle runs smoothly.
3、 Maintenance of the capping group
1. Check the flexibility of the cylinder movement of the bottle holder and address the issue of air leakage.
2. Replace worn rolling cutters, bearings, and fatigue springs.
3. Adjust the gap between the cover roller and the fence to avoid loose or offset cover.
4、 Maintenance of hanging cover components
1. Clean the oscillation bucket and the cover dropping track to ensure smooth transportation of aluminum covers.
2. Check the wear of the hook and pressure plate, replace the tension spring and spring.
5、 Bottle group maintenance
1. Adjust the position of the bottle tray and the height of the bottle bottom rail to reduce bottle breakage.
2. Control the storage capacity of the bottle tray to avoid excessive force between bottles.
6、 Auxiliary system maintenance
1. Clean and detect optical fibers and vacuum pipelines to prevent blockages or abnormal signals.
2. Regularly check the parameters of the hydrogen oxygen generator (such as pressure and temperature) to ensure the quality of the sealing.
Note: Operators need to cooperate with maintenance personnel for regular maintenance, focusing on inspecting vulnerable parts (such as winches, pulleys, and rolling knives) and replacing them in a timely manner.