Quick opening bag filter is a device suitable for liquid filtration, widely used in industries such as chemical, food, and pharmaceutical. In order to ensure the long-term stable operation of the equipment, it is also necessary to maintain and upkeep the equipment. Below, the editor will briefly introduce the operation and maintenance procedures of the quick opening bag filter:

1、 Usage steps

1. After the liquid to be filtered is processed by pre-treatment equipment (such as reverse osmosis equipment), it is input into a quick opening bag filter through a pipeline.

2. Open the feed control valve and allow the liquid to enter the filter bag for filtration.

After the liquid to be filtered flows through the filter bag, it continues to be output through the outlet pipeline.

If it is necessary to replace the filter bag, it is necessary to close the feed control valve, drain the pressure difference, close the outlet control valve, disassemble the original filter bag, clean the equipment, and install a new filter bag.

5. After completing the replacement, open the exhaust pressure differential and then open the outlet control valve to operate the equipment to normal state.

2、 Maintenance and upkeep

1. Regularly clean the equipment to prevent the accumulation of dirt and affect its normal operation.

2. Regularly replace the filter bag to avoid damage or bacterial growth that may affect product quality during use.

3. Regularly maintain and inspect the equipment, and promptly repair or replace any equipment malfunctions found.

4. According to actual usage, adjust operating parameters reasonably to avoid equipment damage and other problems caused by improper operation.

5. Regularly lubricate and maintain the equipment to ensure its normal operation.

6. The storage of equipment should avoid direct sunlight, humidity, and high temperature environments. Used filter bags should be properly handled and classified for storage.

3、 Precautions

1. When using, please strictly follow the instructions and perform necessary maintenance on the equipment.

2. It is strictly prohibited to disassemble or replace components without authorization during equipment operation.

3. If there is equipment failure, it should be repaired in a timely manner. It is strictly prohibited to forcefully use the equipment when it is damaged.

During the installation process, please follow the flowchart and conduct a water pressure test after connecting the pipes.

5. Safety should be taken into account during the operation process, and relevant emergency plans should be formulated.