Stacked filterWidely used in industries such as chemical, pharmaceutical, and petroleum environmental protection, this is an ideal solid-liquid separation equipment for filtering, clarifying, and purifying small impurities in various liquids.

What are the characteristics of stacked filters? Below, the editor will briefly introduce to you:

1. This machine comes in two types: room temperature type and temperature insulation type. The insulation type is suitable for filtering viscous liquids and low-temperature crystalline liquids. This machine can be used for steam heating, hot water circulation insulation, and thermal oil electric heating, thus solving the problems of liquid filtration in pharmaceuticals, chemicals, food and beverage industries.

2. This machine can withstand a high pressure of 0.5Mpa. Mechanical flange concave line compression is selected, mainly relying on consumables for sealing to prevent leakage.

3. This machine has a high flow rate, as it enters the chassis through a DN40, DN50, and DN80 inlet, and enters the barrel through two to three inlets. In addition, there are six to eight holes on each layer of the frame to enter, and qualified liquid is discharged through multiple holes on the small flange at the center of each layer of the mesh plate, ensuring both liquid inlet and outlet, and achieving a filtering area to ensure high flow rate.

4. This machine has a large storage capacity for particles and activated carbon, with a frame height ranging from 1.5 cm to 5 cm.

5. This machine has a large filtration area, with 20 square meters of filtration area, small volume, and small footprint. The filter machine only consists of 40 layers.