The stacked plate and frame filter is a new type of liquid filtration machine for solid-liquid separation. This machine can perform coarse filtration, decolorization, decarbonization, insulation, deep filtration, semi fine filtration, and fine filtration with high flow rates. It is a novel integrated filtration machine widely used in industries such as chemical, pharmaceutical, and petroleum environmental protection. It is an ideal solid-liquid separation equipment for filtering, clarifying, and purifying small impurities in various liquids.
The filtering device of the stacked plate and frame filter is composed of multiple layers of overlapping filter mesh plates and frames. The raw liquid is pressurized and enters the barrel, enters through the outer holes of the frame, and then passes through the filtering medium on the mesh plate. It exits through multiple small holes in the center of the mesh plate and is discharged through the qualified liquid outlet. Filter materials can be selected from reinforced filter membranes, filter paper, filter cloth, stainless steel mesh, nylon mesh, and machine specific filter membranes. Qualified consumables can be selected according to the user's requirements.
Stacked plate and frame filters are particularly used for filtering chemical liquids and viscous liquids. Solve the filtration problem of viscous liquids in the chemical industry. The machine works in a fully enclosed state for filtering liquid odors. It is particularly effective when used in conjunction with a compressor and pneumatic diaphragm pump, truly achieving solid-liquid separation in the filter machine. There are no dripping liquids inside the filter machine, making a small contribution to the operation and workshop without pollution, odor, and environmental protection.
1. This machine has a high flow rate, as it enters the chassis through one DN25, DN32, DN40, and DN50, and enters the barrel through two separate inlets. In addition, there are six to eight holes on each layer of the frame to enter, and qualified liquid is discharged through multiple holes on the small flange at the center of each layer of the mesh plate, ensuring both liquid inlet and outlet, and achieving a filtering area to ensure high flow rate.
2. This machine has a large storage capacity for particles and activated carbon, with a frame height ranging from 1.5 cm to 5 cm.
3. This machine has a large filtration area, with a maximum of 20 square filtration areas. It has a small volume and occupies a small area. The filter machine only consists of 40 layers.
4. This machine comes in two types: room temperature type and temperature insulation type. The insulation type is suitable for filtering viscous liquids and low-temperature crystalline liquids. This machine can be used for steam heating, hot water circulation insulation, and thermal oil electric heating, thus solving the problems of liquid filtration in pharmaceuticals, chemicals, food and beverage industries.
5. The maximum pressure that this machine can withstand is 0.5Mpa. Mechanical flange concave line compression is selected, and it is sealed by filtering consumables to prevent leakage.