Stainless steel multi-layer filterSuitable for closed filtration of liquids with low viscosity and low slag content below 50% concentration to achieve purification, sterilization, clarification, and other requirements for fine filtration, activated carbon removal, particle removal, and semi fine filtration. Microporous filter membranes can be directly used to achieve sterile filtration without the need for microporous membrane filters. This machine has a large filtration area, high flow rate, and a wide range of applications, so it has a wide range of uses in industries such as pharmaceuticals, chemicals, and food. It is widely used in the filtration of injection drugs in pharmaceutical factories and has excellent results.

What are the main structural characteristics of stainless steel multi-layer filters?

Except for the motor, all other components of this machine are made of high-quality corrosion-resistant stainless steel materials such as 304 or 316L, which are suitable for filtering various pH and acid-base solutions;

This machine applies pressure sealed filtration, with low loss of filtrate, good filtration quality, and high efficiency. The filtration section consists of ten layers of filter plates, with a large filtration area and high flow rate;

And according to the different production processes (initial filtration, activated carbon removal, particle removal, semi fine filtration, fine filtration) requirements of the filtered solution, different filter membranes, filter papers, and media can be replaced, and the number of filter plate layers can be appropriately reduced or increased according to the user's production flow rate to meet production needs. Therefore, this machine has the characteristic of being versatile and widely applicable;

The filter plate adopts a flat threaded mesh shape with excellent structure, no deformation, easy cleaning, which can effectively increase the service life of various filter membranes, thereby reducing and saving production costs;

The stainless steel pressure pump equipped on this machine has a small motor and consumes less power. The machine base is equipped with rubber wheels, which are easy to operate and flexible to move, and can be used for mobility. This machine has the same specifications, model, number of layers, and flow rate as the old model, which is 2T/h-3T/h. This machine has been produced and model: WSB100、WSB150、WSB200、WSB300、WSB400、WSB500)。