1、 Equipment installation and environmental requirements
1. Installation location
The equipment should be placed in a well ventilated, dry, and non corrosive gas environment, avoiding direct sunlight and humidity, ensuring a level and stable ground, and preventing vibration from affecting operation.
2. Heat dissipation and ventilation
In high-temperature environments, it is necessary to strengthen heat dissipation measures, such as adding ventilation equipment or cooling fans, to avoid overheating and malfunctions.
2、 Pre startup inspection
1. Coolant and power supply
Check if the coolant level is sufficient, ensure that the power supply voltage meets the requirements, have good grounding, and avoid electrical faults.
2. System sealing
Check if the pipeline connections are secure and if the seals are intact to prevent leaks from affecting the cooling/heating effect.
3、 Operation monitoring and operation
1. Parameter control
Real time monitoring of temperature, pressure and other parameters to avoid overheating or overpressure operation, and unauthorized modification of set values is prohibited.
2. Exception handling
If the device produces abnormal sounds, vibrations, or parameter fluctuations, it should be stopped immediately for inspection, and the fault should be eliminated before restarting.
4、 Maintenance and upkeep
1. Regular cleaning
Use neutral cleaning agents to wipe the surface of the equipment, regularly clean the internal dust and residue, and avoid blockage or corrosion.
2. Lubrication and replacement
Regularly lubricate moving parts (such as bearings) and replace aging seals and vulnerable parts in a timely manner.
5、 Safety and emergency measures
1. Operating standards
Operators need to undergo professional training, strictly follow the instructions and procedures, and are prohibited from operating in violation of regulations.
2. Emergency stop
In case of emergencies such as leaks or overheating, immediately cut off the power and take emergency measures.
6、 Long term suspension management
1. Shutdown maintenance
Before long-term shutdown, it is necessary to drain the coolant, clean the equipment, and disconnect the power supply. Regular power on inspections should be conducted to prevent component aging.
2. Seasonal use
Seasonal equipment (such as air conditioning) can be appropriately reduced in maintenance frequency during downtime, but it is necessary to ensure a comprehensive inspection before restarting.
The above measures can ensure the stable operation of the equipment and extend its service life.