-
E-mail
635002249@qq.com
-
Phone
13957104313
-
Address
Sunshine Star City, Hangzhou Economic and Technological Development Zone
Hangzhou Hanzhikang Purification Equipment Co., Ltd
Process principle of titanium rod flip filter
Date: 2024-06-19Read: 5
The titanium rod flip filter is a filter device that uses titanium rods as filter media. Due to its excellent chemical stability, high strength, non toxicity, and odorlessness, titanium rods are widely used in fields such as water treatment, food processing, and biomedicine.
The process principle of the titanium rod flip filter is to filter impurities and microorganisms in water through the filter material titanium rod, in order to remove pollutants and improve water quality. The specific process is divided into the following steps:
Step 1: Water flows into the filter
When water flows through a titanium rod filter, pollutants and impurities in the water are captured by the small pores inside the titanium rod.
Step 2: Filtering
After the water flows through the filter, the filter mesh inside the titanium rod will filter pollutants, suspended solids, sediment and other particles in the water, so that most of the solid particles in the water are filtered.
Step 3: Active adsorption
In addition to filtering large particles, titanium rod filter equipment can also perform active adsorption on organic substances, odors, chromaticity, etc. in water to improve water quality.
Step 4: Disinfection
Some titanium rod filter equipment can also use disinfection technologies such as ultraviolet or ozone to disinfect microorganisms in water. This ensures the safe drinking of water.
Next Article: Advantages of Stainless Steel Sintered Filter Cartridge