1、 Pre operation inspection
1. Check if the microporous sterilization filter is in good working condition and confirm that the equipment is not damaged or blocked by foreign objects.
2. Ensure that the power supply of the microporous sterilization filter is in good contact and there is no short circuit or leakage.
2、 Preparation work
1. Place the microporous sterilization filter on a stable workbench and connect the corresponding pipes.
2. Choose the appropriate filtering mode and filtering medium based on actual usage.
3、 Start operation
1. Turn on the power of the microporous sterilization filter and follow the instructions in the manual to turn it on.
2. Set the inlet and outlet pressure and flow rate of the microporous sterilization filter to ensure that the equipment can work properly.
4、 Filtering operation
1. Open the feed valve and slowly inject the material to be processed into the microporous sterilization filter.
2. Observe the pressure gauge and flow meter of the microporous sterilization filter, and adjust the inlet and outlet pressure and flow rate according to the actual situation.
5、 Stop operation
1. After the material to be processed is filtered, close the feed valve.
2. Turn off the power of the microporous sterilization filter and wait for the equipment to stop running before proceeding with the operation.
6、 Cleaning and maintenance
1. Clean the residue inside the microporous sterilization filter to ensure that the equipment is in a clean state.
2. Regularly clean the filter media and replace damaged components to maintain good performance of the equipment.
7、 Precautions
1. During the operation, it is necessary to avoid suddenly turning off the power to prevent equipment damage.
2. Operators must wear protective equipment to prevent accidental injuries.