The high gravity alcohol distillation tower is a new and efficient distillation equipment widely used in ethanol, methanol, acetone, ethyl acetate, acetonitrile, tetrahydrofuran, dichloromethane DMF、DMSO、 Recovery and product separation and purification of organic solvents such as toluene, isopropanol, and tert butanol.
The main structural components of a high gravity alcohol distillation tower are:
1. Tower body: The tower body is the main part of the distillation tower, usually made of stainless steel, with sufficient strength and corrosion resistance. The tower body can withstand the pressure and temperature generated during the distillation process and maintain sufficient stability
2. Feed inlet: The feed inlet is used to introduce alcohol raw materials into the distillation tower. It is usually located at the bottom of the tower and equipped with suitable valves to control the feed rate. 、
3. Jet: Jet is the core component of supergravity steaming technology. It accelerates the liquid to supersonic state through strong pressure, forming a mist. The alcohol raw material is neutralized in the injector and flows upward along the inner wall of the tower.
4. Collector: The collector is located at the top of the tower and is used to collect pure alcohol after steaming the filling. It is usually equipped with a cooling system to lower the temperature of alcohol vapor and promote condensation. The alcohol in the collector is transported to the next processing stage through pipelines.
5. Condenser: A condenser is a heat exchanger used to cool alcohol vapor into liquid. It can be a tubular heat exchanger or a jacketed heat exchanger, depending on the process requirements. Through the cooling effect of the condenser, alcohol vapor is condensed into liquid and collected in the collector.
6. Control system: The control system is used to monitor and control the operating parameters of the distillation tower, such as temperature, pressure, flow rate, etc. Through an automated control system, the stability and efficiency of the distillation process can be ensured. The control system includes components such as sensors, control valves, displays, and controllers.
7. Discharge outlet: The discharge outlet is located at the bottom of the steaming tower and is used to discharge residue and other impurities. It is usually equipped with valves to close or open the discharge port when needed