Our company's "Stirring Reactor for the Synthesis of Ternary Positive Electrode Material Precursors" [CN208465873U] has been authorized by the state. Since around 2010, the company has been conducting research on stirring reactors for the synthesis of ternary material precursors and has successfully designed and produced satisfactory stirring reactors for customers. Starting from the initial few tens of liters of small reactors in ZUI, we have been exploring with customers until the later 10m3 reactor. Yuanzheng Company has accumulated a wealth of experience in stirring reactor design.

In recent years, with the explosive growth of ternary cathode materials, it is necessary to transform this technological advantage into an economic advantage. According to market development needs, it is necessary to scale up the original 10m3 stirred reactor and develop larger stirred reactors to meet the continuously expanding production capacity of ternary cathode material manufacturers. Optimize the diameter, stirring speed, and number of impeller layers of the mixer separately to achieve * mixing time and higher shear rate under less energy conditions; By adjusting the position and number of drip tubes for the raw materials, they can be quickly and evenly dispersed throughout the entire stirred reaction vessel. After detailed design optimization, the stirred reactor used for the synthesis of ternary cathode material precursor was enlarged to 40m3 and successfully applied to a long-term cooperative customer.