The electric constant temperature drying oven is suitable for drying various products or materials, as well as electrical, instrument, meter, component, electronic, electrical, automotive, aviation, communication, plastic, mechanical, chemical, food, chemical, and hardware tools under constant temperature environmental conditions and conducting various constant temperature adaptability tests.

Below, the editor will briefly introduce the operating precautions of the electric constant temperature drying oven, as follows:

1. The ambient temperature for the use of this box shall not exceed 45 ℃.

2. Before use, it is necessary to check the installation position of each electric heating wire of the heater to prevent accidents caused by overlapping or collision of electric heating wires.

3. When using this box, the power supply voltage must match the rated working voltage of the phase box, otherwise it may cause damage to the electronic instruments inside the box.

4. This box is a non explosive drying box, so do not put flammable and volatile materials inside the drying box to avoid explosion.

5. Do not disassemble the components arbitrarily to avoid damaging the electrical circuits inside the box.

6. What is the average negative weight of the test sample shelf at 15 kilograms per square meter? When placing the test sample, do not place it too densely or overload it. At the same time, do not place the test sample or other things on the heat dissipation plate that affect the convection of hot air.