Electromagnetic vibration feederUniformly, continuously or quantitatively feed block, granular and powdered materials from the storage warehouse or funnel to the receiving device, with stepless adjustment of the feeding amount, and achieve centralized and automatic control of the production process. Electromagnetic feeder is a universal equipment that follows different standards according to different industries, such as food grade, which can be customized.

The daily maintenance of electromagnetic vibration feeders should focus on mechanical structure inspection and electrical component maintenance. The specific methods are as follows:

Mechanical component maintenance

1. Bolt tightening inspection

Check daily whether the bolts in various parts are loose, especially the connection bolts between the vibrator and the material tank. If any looseness is found, tighten them immediately. ‌

2. Vibration gap cleaning

Regularly clean the air gap blockage between the iron core and the armature to avoid abnormal vibration caused by foreign objects. ‌

3. Spring status inspection

Check the spring for deformation or breakage every week to ensure that the spring elasticity meets the requirements (usually replaced every 2 years). ‌

Electrical component maintenance

1. Current monitoring

Monitor the ammeter of the electrical control box during operation to ensure that it does not exceed the rated value. If there is an abnormality, immediately shut down for maintenance. ‌

2. Electrical component protection

Disconnect the power supply during maintenance to avoid live operation; Replacing components such as thyristors requires matching specifications and parameters. ‌

3. Controller maintenance

Keep the control box dry and ventilated, regularly clean dust, and avoid high temperature environments affecting component performance. ‌

auxiliary maintenance

1. Lubrication management

Add lubricating grease to the bearings every 2 months, and in high-temperature environments, it should be added once a month. ‌

2. Material Management

The material tank maintains a certain amount of material inventory to prevent equipment damage caused by no-load operation. ‌

3. Security check

Check if the protective cover is intact to prevent foreign objects from entering the interior of the equipment. ‌