Ultrasonic vibrating screenInstallation inspection

1According toThe ultrasonic generatorThe identification of the connecting wire should be directly inserted into the interface and locked to ensure the correct connection between the power supply of the ultrasonic generator and the ultrasonic interface of the screening machine.

2Adjust the power knob of the ultrasonic generator to the minimum, turn on the power switch of the ultrasonic generator, and investigateammeterIs there any abnormality,(Under normal circumstances, the current should be less than200mA).

3Check and debug3D vibrating screendividefilterAnd it is necessary to ensure that the material's running track reaches the standard running trajectory.

4Run the three-dimensional vibration screening filter machine(vibrating screen)Add a small amount of material and fine tune the power supply of the ultrasonic generator by adjusting the knobscreenReaching an ideal state.(The current should be less than200mA)

5Under normal conditions of the ultrasonic vibrating screen, the material can be evenly fed and then enter normal operation.