Company Profile

CAMLogic has been engaged in the field of industrial automation and control equipment since 1964. Years of accumulated experience have made us one of the companies in the field of blade level switches. CAMLogic produces its instruments, responsible for design, production, service, and sales, utilizing technology and partnerships to respond to market demands at the right time. Although there are multiple versions to choose from, CAMLogic can guarantee short delivery times throughout the entire production process, so that we can even use fast shipping services to meet emergency situations. Due to its quality, CAMLogic is active in the international market, fully utilizing cooperation with selected partners to ensure the same service and quality standards, making CAMLogic stand out for many years.

Product Introduction:

CAMLOGIC PFG05-1124 with flange and three blade, 500mm length anti rotation level gauge

The shell and cover are made of die cast aluminum Ø

AISI 303 / EN 1.4305

Stainless steel shaft, lifetime lubricated sealed bearing, with NBR dustproof retaining ring Ø

Various polyamides orAISI 304/EN 1.4301 stainless steel propeller Ø

2 "1/2 gas (BSPP) process connection and 1/2 gas (BSPP) dual cable inlet Ø

speed 1 RPM Ø ambient temperature -20 ° C to+90 ° C (-4 ° C) ..+194 ° F) Ø Process temperature -20 ° C to+90 ° C (-4 ° C .. +194°F） Ø

Process pressure 0.8 to 5 bar (11.6 to 72.5 psi) Ø IP65 protection level (dustproof, waterproof jet) Ø

power consumption 4 W Ø Contact capacity at 10V 250A (AC) Ø Micro switch single pole double throw output signal Ø

If the product is used in an area with a sexual environment, it has the following characteristics: Ø

ambient temperature -20 ° C to+70 ° C (-4 ° C) .. +158°F） Ø

Process temperature -20 ° C to+70 ° C (-4 ° C) .. +158°F） Ø

Process pressure 0.8 to 1.1 bar (11.6 to 15.9 psi)

Product Features:

CAMLOGIC PFG05-1124 with flange and three blade, 500mm length anti rotation level gauge

1Easy to install: No specific tools or settings are required.
2. Provide high standards of performance in the presence of potential dust/powder.
3. The probe can adapt to various materials such as plastic or stainless steel blades.
4. Mechanical and electrical testing of measuring instruments as required.
5. Extreme, this instrument can be used as a signal in addition to radar, capacitor, acoustic or continuous liquid level probes.

Product Application:

CAMLOGIC PFG05-1124 with flange and three blade, 500mm length anti rotation level gauge

Production of rotary, capacitive, pendulum sensors for solid materials, liquids, powders, and particles RPM 。