Company Profile

GermanySICOMSsensorSISE0501/0601Also known as oil mist detector, it is the main protective component of oil mist protection system, which can timely detect whether there is bearing overheating or piston ring damageExcessive air leakage caused by injury leads to the formation of oil mist in the crankcase, resulting inmonitorThe main operating components of a diesel engine——Is the working condition of the crankshaft and cylinder normal.

motcomLimited company is composed ofDr. Sven ClaussenandDipl. by Dieter Lott.Yu2012Established through annual registration.motcom Gm bHofSICOMSThe system is an oil mist detector system for large diesel engines,BECOMSIt is a comprehensive production monitoring and measurement system for the safety of shafts and bearings.
motcom Gm bHis a productBeCOMS?andSiCOMS?The only owner of it.

Main products:

GermanySICOMSsensorSISE0501/0601，SICOMSOil mist concentration detector,SICOMSOil mist concentration sensor,MOTCOMDetector,MOTCOMsensor

GermanySICOMSsensorSISE0501/0601Functional Description
SiCOMSThe system is an oil mist detection system with no older generationOMDDisadvantages of the system.SiCOMSThe sensor is a non intubation system,SiCOMSThe sensor is directly installed on the engine wall, allowing for fast and accurate measurement of the generated oil mist in each chamber.
SiCOMSThe measurement data of the sensor is evaluated by sending a redundant serial bus and displaying the data of the entire system.
Up to16aSiCOMSSensors can be connected to a calculator. In the event of an alarm, the evaluator is equipped with two*The standing relay can immediately start the engine shutdown to prevent further damage.

GermanySICOMSsensorSISE0501/0601Advantages:

1. Classification certificate: International Association of Classification SocietiesM67 IACSCertification and China Classification Society CertificationCCS.

2. Explosion proof: Explosion proofATEXcertification

3. Easy maintenance: the oil mist probe can be directly replaced during operation

4. No vulnerable parts: no pipes, no suction, no insertion tubes, no wear, no movable mechanical parts

5. Anhydrous condensation problem

6. Compatibility: andMSS-HXbrandOMD/SE-0910Series oil mist detector compatible