1、 Preparation before operation
Before using the hydrogen peroxide sterilizer, it is necessary to ensure that the equipment is running properly before performing the following operations:
1. Post safety warning signs
•Signs such as "Dangerous Goods" and "No Entry" should be posted around the hydrogen peroxide sterilizer to indicate the hazardous nature of the equipment and remind people to pay attention to safety.
2. Confirm that the device is in the anti misoperation state
•Perform a thorough shake check to ensure that the plug and internal equipment are securely fastened, and that the equipment is in an anti misoperation state.
3. Confirm that the item is suitable for hydrogen peroxide sterilization
•When using a hydrogen peroxide sterilizer, it is necessary to confirm whether the disinfected item is suitable for hydrogen peroxide sterilization.
•Be careful not to sterilize items that are not heat-resistant, waterproof, or contain organic substances with hydrogen peroxide.
2、 Precautions during operation
When operating a hydrogen peroxide sterilizer, there are the following precautions to be taken:
1. Use the correct concentration of hydrogen peroxide solution
•Confirm that the concentration of hydrogen peroxide solution used is consistent with the equipment requirements.
2. Set time and temperature according to device requirements
•Set up the equipment based on the material used, the required sterilization time, and temperature.
3. Confirm the safe opening of the door
•During the operation of the equipment, if it is necessary to remove or inspect items, the power should be turned off and wait for 8 hours before using the key to open the equipment door.
4. Keep the area around the equipment clean
•Around the equipment, it should be kept clean and tidy, and any residue of hydrogen peroxide should be removed.
5. Do not put explosive materials inside the device
•Do not put explosive, flammable materials or chemicals inside the equipment.
6. Confirm that the operator has sufficient experience
•Confirm that the operators have received training and have sufficient experience in using the equipment.
3、 Precautions after operation
After completing hydrogen peroxide sterilization, the following operations need to be performed:
1. Confirm that the device has stopped running
•After the device has finished running, it is necessary to confirm that it has stopped running and unplug the plug.
2. After waiting for 8 hours, open the sterilization box
•For the items to be removed and the sterilization box card board, it is necessary to wait for 8 hours. Only after complete volatilization can the sterilization box be opened. During this period, ventilation needs to be maintained.
3. Remove residual hydrogen peroxide and pressure
•The residual hydrogen peroxide in the equipment and pipelines needs to be removed, and it is necessary to remove the residual pressure in the oxygen inhalation and exhalation pipelines inside the equipment.