Spherical concentratorIt mainly consists of four parts: the main body of the concentration tank, the condenser, the vapor-liquid separator, and the liquid receiving tank. It can be used in industries such as pharmaceuticals, food, and chemicals for the concentration, distillation, and recovery of organic solvents from feed liquids. Due to the use of vacuum concentration, the concentration time is short and the effective components of thermosensitive materials will not be destroyed.Spherical concentratorThe parts in contact with the material are made of stainless steel, which has good corrosion resistance, durability, and meets GMP standards. Other required vacuum systems, liquid measuring tanks, discharge pumps, etc. will be provided by the customer themselves.Spherical concentratorSuitable for the concentration, distillation, and recovery of organic solvents in industries such as pharmaceuticals, food, and chemicals, it has a short concentration time and does not damage the active ingredients of thermosensitive materials. And it can be used for alcohol recovery and simple reflux extraction. The contact parts between the equipment and materials are made of stainless steel, which has good corrosion resistance and meets GMP standards.

Spherical concentratorWith the combination of external heating natural circulation and vacuum negative pressure evaporation, the evaporation speed is fast, and the liquid material is not concentrated in the fully sealed foam. The medicine liquid concentrated by this equipment has the characteristics of no pollution, strong medicine flavor, and convenient cleaning. This device is easy to operate and occupies a small area. The heater and evaporator adopt stainless steel insulation structure, and the outer surface of the insulation layer is made of stainless polished steel plate, which is beautiful and generous.Spherical concentratorThe parts in contact with the liquid material are made of stainless steel and comply with GMP standards. Vacuum feeding is used for addition, so when using, the vacuum pump should be turned on and the feeding valve should be opened at the same time. In order to ensure a certain evaporation space, the liquid level in the tank should be close to the cylinder sight glass. After closing the feeding valve, the jacket steam valve can be opened to allow the liquid in the tank to boil moderately and start evaporating. In order to accelerate the speed, vacuum concentration is adopted, and the vacuum degree is determined by the user's different requirements.