In order to ensure the safety of operators and the normal use of equipment, the following operating procedures must be followed when using a desktop slicer:
1. Equipment installation and inspection
(1) Installation
•Place the desktop slicer on a stable surface and ensure that the body is securely fixed.
•Connect the slicer to the power cord and ensure that the connector is securely connected.
•Check the tightness of the slicer blade to ensure that it is installed correctly and securely.
(2) Equipment inspection
Before each use of the desktop slicer, a device inspection must be conducted to ensure that the equipment is in good condition.
•Check if the power cord of the slicer is damaged, and replace it promptly if there is a problem.
•Check if the blades of the slicer are dull or damaged, and replace them promptly if there are any issues.
•Check if the protective cover of the slicer is intact, and repair or replace it if there are any problems.
2. Personal protective measures
(1) Wear appropriate work clothes
When using a desktop slicer, it is necessary to wear work clothes that meet safety requirements. Work clothes should have the following characteristics:
•Tight fitting clothing: Avoid clothing such as cuffs and collars being caught up by the slicer.
•Protective gloves: Protect hands from blade injuries.
•Protective goggles: Avoid eye injuries from splashing objects during the operation of the slicer.
•Protective shoes: prevent heavy objects from pressing on the feet and provide stability for the feet.
(2) Pay attention to personal hygiene
Before and after using a desktop slicer, operators should pay attention to personal hygiene, including:
•Wash hands: Keep hands clean and avoid contaminating food.
•Do not touch the face: Avoid contaminating the face with oil stains, bacteria, etc. during the operation of the slicer.