The pulsating vacuum sterilization cabinet uses saturated steam as the sterilization medium, and utilizes the physical characteristics of releasing a large amount of latent heat and humidity during steam condensation to keep the sterilized items in a high temperature and moist state. After a set constant temperature time, the main component protein of bacteria solidifies and is killed. This machine is widely used for disinfection and sterilization of items in hospital supply rooms, operating rooms, pharmaceutical factories, laboratories, scientific research and other units.
Main product features of pulsating vacuum sterilization cabinet:
1. The main body is a horizontal rectangular shape composed of two layers, inner and outer, which is conducive to preheating, drying, and continuous operation during the sterilization process. The inner liner is made of imported SUS304 stainless steel material, and the inner surface has undergone precision mechanical polishing treatment, resulting in a smooth surface that meets the requirements of GMP pharmaceutical industry. The sleeve is made of SUS304 welded material. Each device has undergone X-ray inspection and is accompanied by complete quality certification materials issued by the labor department, which comply with the relevant regulations and requirements of steel pressure vessels.
2. The control system adopts programmable logic controller (PLC) and touch screen for control, processes temperature, pressure control components and other input switch values, outputs different control signals, and automatically completes the control process.
3. The cabinet door adopts an airtight structure, which is flexible to open and easy to operate. The door lock is our company's technology, easy to operate, and reliable in performance. And it has a safety interlock device: if the door is not tightly closed, no steam can enter the sterilization cabinet, and if there is steam (pressure) in the interior, the door cannot be opened. And there are corresponding indicator devices. Meets the safety requirements of the Ministry of Labor. The sealing strip material is made of silicone rubber, which provides uniform and reliable sealing performance.
4. The sterilization vehicle is made of acid resistant stainless steel, which is lightweight, sturdy, and has a long service life.
5. The decorative cover is made of all stainless steel brushed plate, which is novel, beautiful, and easy to clean.
6. The GMP verification interface provided on the equipment.
7. The pipeline system consists of angle seat valves, filters, vacuum pumps, safety valves, check valves, drain valves, pressure controllers, etc., ensuring the reliable and safe sterilization process of items.
8. The air supply uses cold air passing through the air supply filter. By heating the stainless steel coil through a jacket and entering the inner cavity, the drawbacks of cold air entering the cavity and producing condensation water are effectively reduced, thereby ensuring the drying of sterilized items.
9. The handling vehicle is flexible in operation and has a sturdy structure.
10. The sterilization cabinet consists of several parts, including the main body, doors, piping system, control system, decorative cover, sterilization vehicle, and handling vehicle (YDC-0.2, YDC-0.3, YDC-0.6 have no vehicle due to their small volume and are equipped with built-in screening plates).