Continuous operation of high-temperature instantaneous sterilization equipment

The high-temperature instant sterilization equipment has the following requirements:

1. High temperature: utilizing the characteristics of superheated steam and raw materialsInstantly heated to140℃-160℃，Material heatingUniform and consistent.
2. Instantaneous: instantaneous sterilization; Immediately separate superheated steam and raw materials after sterilization; Instant powderCool to room temperature to reduce the loss of efficacy of the original medicinal powder.
3. During the entire sterilization process, there must be no clumping or adhesion of raw materials.
4. The equipment should be sealed, and the sterilized raw materials should not have secondary contamination.

To achieve the above requirements, the heat source used for high-temperature instant sterilization of powder raw materials must beSuperheated steam.

high temperatureinstanttimeSterilization characteristics:

• Maintain the effective ingredients in materials: drying and sterilizing thermosensitive materials such as food and pharmaceutical raw materials;
• Drying speed is higher than hot air drying; The product has a lower moisture content and higher sterilization efficiency;
• It can utilize the latent heat of steam, with high thermal efficiency and excellent energy-saving effect；
• Drying efficiency, reducing drying energy consumption, minimizing environmental pollution, and improving product quality；
• Processing in a micro oxygen environment can inhibit the decay and oxidation of foodIt has a gasification effect on residual pesticides;

Equipment schematic diagram

​

The material enters the sterilization chamber at a certain speed, and the rotating shaft drives the steam stirring blade to rotate according to the set speed. At the same time, superheated steam is sent into the sterilization chamber, and the stirring blade rotates with the animal material. The material is suspended in the high-speed flowing superheated steam and is quickly and uniformly heated to ensure sterilization. After sterilization, the material is separated from the superheated steam through a separator, and the separated material is rapidly cooled,The material is discharged from the discharge valve or sent to the sterile storage tank.

Sterilization materials: Chinese herbal powder (single or compound), health products, solid beverages, tea, grains, spices, etc.