The rotary granulator is suitable for the rotary granulation of cylindrical and elongated particles in industries such as chemical, pesticide, food, and pharmaceutical. Powdered materials with adhesive (water) must have a certain degree of viscosity.
Compared with traditional rotary granulators, this machine has more advanced functions and a wider range of applications. During continuous production, the heat generation is only half of that of traditional granulators, especially for those heat sensitive materials, the granulation effect is more obvious.
All parts of this machine that come into contact with materials are made of SUS304 stainless steel. The rack is equipped with casters, making it easy to move. The professional transmission system ensures that the noise level of this machine during production is less than 75 decibels and can operate continuously for 24 hours.
The structural principle of the rotary granulator:
1. The main components of this machine include: feeding hopper, cooling system, feeding knife, granulation knife, screening frame, discharge tray, granulation system, transmission system, electrical system, etc.
2. The mechanical transmission components are placed inside, and the professional transmission system ensures smooth operation and lower noise during operation.
3. This machine is equipped with a water cooling system in the feeding hopper, effectively reducing the temperature generated by the rotational friction of the material in the feeding hopper before granulation.
4. The granulation system of this machine is different from traditional rotary granulators. During the operation of the granulation knife, the speed of the pressing knife can be adjusted separately to be fast, slow, or stopped, making it more widely applicable.
5. This machine is equipped with water cooling and air cooling devices, and the airtight sealing device can provide dual protection for the equipment. A more reasonable structure ensures that even if materials pass through the middle rotating shaft, they will not enter the reducer and cause damage to the reducer.
6. This machine can also control the discharge speed and granulation speed to produce more suitable particles.
7. This machine adopts a split screen mesh, with one set of mesh consisting of two pieces. The new mesh installation structure makes it easier and faster to disassemble and replace the mesh. The mesh mesh mesh has less deformation in production and its service life is significantly increased compared to traditional mesh meshes. Greatly reducing production costs, lowering labor intensity, and improving production efficiency.