Operation skills of fast granulator
Date: 2020-09-17Read: 8
The working principle of the fast granulator is that the processed raw materials enter the feed inlet of the crushing granulator and fall into the conical working chamber. The rotating rotary knife exerts a swirling effect on the raw materials, and the particles are thrown towards the screen surface by centrifugal force. At the same time, the high-speed rotation of the rotary knife produces a shearing effect with the screen surface. The particles are crushed into small particles between the rotating knife and the screen and discharged through the screen. The size of the crushed particles is adjusted by the number of sieves, the distance between the rotary blade and the sieve, and the speed of rotation.
Today, the editor will take you to learn about the operation skills of the fast granulator:
When the material is dry powder, it can be directly sprayed with water and stirred slightly to make particles.
When a small amount of material has too much moisture, drying the surface of the material can also directly use this machine granule.
When the material appears in chunks, it is not necessary to crush or process the chunks, and this machine can be directly used for granulation.
Before driving, refuel all the oil gauges in the machine's casing once to improve its service life.
The oil stored in the worm gear housing should be replaced with new oil every three months, which can improve the service life of the machinery.
If you don't know the mesh size of the sieve to be used for granulation, you can first manually pelletize with the sieve.