Chinese medicine grinderIt can process many traditional Chinese medicine raw materials, just put those materials into the machine, crush them first, and then easily crush them, thus achieving a pre crushing effect in the early stage of processing and ensuring the effect of later processing. It can be used to crush waste and inferior products of Chinese herbal medicine, chemical raw materials, low hardness ores, polystyrene, polypropylene, nylon, engineering plastics, soft PVC foam materials, or injection nozzles. If the corresponding sieve plate is replaced and the blade clearance is adjusted, various plastic waste such as blown film, rolled film, mineral water bottles, etc. can also be broken.

　　

The traditional Chinese medicine grinder is mainly used for the relatively high-speed movement between the cutting disc and the gear ring, which cuts and crushes the fibers. There are three different tool combinations for the movable cutter head: coarse crushing, medium crushing, and micro crushing. The crushed finished product is separated by a cyclone separator to obtain the finished product, and the crushed dust is recovered by bag dust removal. The machine is made of stainless steel and has a water cooling device at the bearing and crushing box grading points; The gear ring has an arc-shaped serrated spiral shape. Continuous discharge, no dust flying during the production process, in compliance with GMP requirements.

　　

The traditional Chinese medicine grinder needs to be well maintained and serviced.

　　

1. Regularly inspect and pay attention to the bearings and rotating parts of the crusher, and regularly add high-speed grease. When the bearing is worn out for a long time, it should be replaced.

　　

2. Hammer blades, such as excessively worn edges, can reduce production and cause the machine to heat up. It should be replaced in a timely manner. When replacing, all 4 pieces must be replaced and their weights must be kept equal to achieve balance and prevent strong vibration during rotation.

　　

3. The inclined fan has excessive wear and a significant increase in slag content, and should be replaced in a timely manner. When replacing, strictly pay attention to the consistency of the gap between the diagonal fan liners, otherwise it will affect the quality of the powder.

　　

4. The toothed plate of the drug grinder will lose its sharp edge after long-term use, and attention should be paid to replacement.