YK series swing pellet machine

The YK series swing pellet machine is mainly suitable for manufacturing various specifications of pellets in industries such as pharmaceuticals, chemicals, and food. After drying, it can be formed into various shaped products. The machine can also be used to crush and condense dry materials into blocks. All material contact points are made of stainless steel material. The whole machine has the advantages of compact structure, beautiful and elegant appearance, easy cleaning, simple operation, high output, and low energy consumption. The material contact points are made of high-quality stainless steel and polished, with good smoothness, easy cleaning, low noise, no material penetration, easy operation and maintenance, and in compliance with GMP requirements.
YK series swing pellet machine product structure: 1. Main body: The body is an independent rectangular cylinder, with a closed bearing seat connected to the powder hopper, which extends towards the body. 2. Particle manufacturing device: The rotating drum is horizontally placed under the powder hopper, with bearing supports at the front and rear. It rotates in a reverse direction through the transmission of gears. The front bearing cover on the end face is movable. When assembling and disassembling, simply unscrew one wing nut, and the bearing cover and rotating drum can be extracted. The two ends of the placing drum are made with convex square rings. 3. Gearbox: Adopting worm gear transmission, the gearbox can store oil, and there is a sight glass on the gearbox to observe the operation and oil storage. The outer end of the worm gear is equipped with an eccentric shaft, which drives the rack to move back and forth. 4. Screen clamp: The device is made of steel pipes on both sides of the rotating drum, with a long groove in the middle. The two ends of the screen are embedded in the groove. The screen is wrapped around the outer circle of the rotating drum by rotating the flower shaped handwheel, which is supported by gears and can be adjusted for tightness. 5. Motor frame: One is securely fastened to the screw, and the motor is mounted on the iron plate. When the screw bolt is rotated, the motor moves up and down to adjust the belt.