Spiral belt mixer is an efficient material mixing equipment widely used for uniform mixing of powders, particles or slurries, suitable for industries such as food, chemical, pharmaceutical, etc. Its usage mainly involves steps such as parameter setting, equipment startup, and operation monitoring. It is easy to operate and supports multiple discharge methods.
Instructions for using the screw belt mixer:
1. Parameter setting: Firstly, set the mixing parameters through the operation panel, such as temperature control (adjust the upper and lower limits to the target value, such as 80 ° C), to ensure stable operation of the heating system; The equipment can be customized with different discharge ports (such as side discharge, flip cylinder discharge, or bottom discharge) to adapt to material characteristics.
2. Start up and operation: After confirming the parameters, start the mixing function (such as forward rotation mode), and the screw system will start running; The material undergoes radial and axial movements driven by the inner and outer spiral belts to ensure uniform mixing; During operation, it is necessary to monitor temperature changes (such as slowly rising from room temperature to the target value) to avoid exceeding the limit.
3. Mixing process monitoring: The mixing time is short and the uniformity is high (up to 95% or more), suitable for viscous materials; Observe the flow status of materials during the process to ensure there are no residues; If there are signs of leakage, they can be promptly addressed through a packing sealing mechanism (such as tightening bolts to compress the pressure ring).
4. Stop and discharge: After mixing is complete, turn off the heating and stirring functions; Select the discharge method as needed (such as opening the pneumatic discharge port), clean the interior of the equipment to maintain performance.
5. Pay attention to the type of material (such as dry powder, granules, or high-density materials) during operation to avoid overloading; Regularly check the sealing components (such as shaft seal silicone rings) to ensure the durability of the equipment.
The screw belt mixer equipment has a low height and strong applicability, but safety regulations must be followed to prevent operational errors.