There are several possible faults that may occur in a trough mixer, including startup, host vibration, host oil leakage, and so on. So how should we pay attention to these aspects in daily life?

*Difficulties and inability to start during startup are generally attributed to the following three situations, including three corresponding solutions:

1. Full load and overload start operation, solution: reduce the load, run first and then add materials;

2. The power supply is not connected or there is a phase loss. Countermeasures: Please have an electrician connect the power supply and check the circuit;

3. Low voltage, countermeasures: avoid peak electricity consumption or ensure normal voltage.

Secondly, there are five causes and corresponding solutions for the abnormal vibration and noise of the main unit of a small slot mixer

1. Damaged propeller shaft, countermeasures: replace propeller shaft;

2. Installation not adjusted properly, countermeasure: Reinstall and adjust the level of the mixer;

3. Spiral blade damage, countermeasures: replace the spiral blade;

4. Transmission damage, countermeasures: replace the damaged parts of the transmission;

5. No lubricating oil or lubrication pump does not supply oil, countermeasures: add lubricating oil or replace the oil pump or clean the blockage in the oil pump pipeline.

Thirdly, there is leakage inside the cylinder of a small slot mixer, which is mostly due to its sealing components, as follows:

1. The solution for viscous materials entering the seal is to clean the seal;

2. The solution to aging or damage of the seal is to replace it.

Due to its good dispersibility, wide range of applications, simple and convenient use, long service life, low investment, and fast results, slot mixers are highly popular in many situations. Many operators of trough mixers lack experience in their daily maintenance and troubleshooting, resulting in minor problems not being repaired in a timely manner and leading to major malfunctions, greatly shortening the service life of trough mixers. Therefore, it is necessary to understand and master the common faults and solutions of trough mixers, as well as the daily maintenance methods of trough mixers.