BLJ-02 Disc Peel Tester - Ink Layer Bonding Fastness Tester Labthink Blue Light

BLJ-02 Disc Peeling Tester Ink Layer Bonding Fastness TesterProfessional testing of ink layer adhesion for plastic film and glass paper decorative printed products (including composite film printed products) produced by gravure printing technology. It is also used for testing the adhesion state of surface layers formed by vacuum coating, surface coating, composite and other related processes.

Main technical features:

The stripping angle and speed are strictly designed according to national standards, effectively ensuring the reliability and universality of the detection data

The system is controlled by a microcomputer and equipped with a PVC control panel and LCD display screen, making it convenient for users to quickly and conveniently conduct experimental operations and display data

Automatic alarm prompt at the end of the experiment to ensure user safety during operation

BLJ-02 Disc Peeling Tester Ink Layer Bonding Fastness TesterTesting principle and execution standards:

The glass tape paper selected according to the standard regulations and the sample ink printing surface adjusted by the test environment are bonded together with the standard load, rolling speed, and rolling times. They are left to adjust for a certain period of time, and then peeled off with a certain pressure and peeling speed. The condition of the sample ink layer being peeled off is observed and measured to determine and analyze the bonding strength of the printing ink layer. This instrument complies with multiple national and international standards: GB/T 7707, JIS C2107, JIS Z0237

Technical Indicators:

Inter disk pressure: 100 N

Peel speed: 0.8 m/s

Dimensions: 280mm (L) × 230mm (W) × 380mm (H)

Power supply: 220VAC 50Hz/120VAC 60Hz

Net weight: 21Kg