C180M Paper Breathability Tester Filter Attachment Paper Breathability Tester

C180M Paper Breathability Tester Filter Attachment Paper Breathability Tester——Adopting the principle of differential pressure testing, it is professionally suitable for testing the breathability of cigarette paper, filter forming paper, filter attachment paper, and materials with directional breathable belts.

Product Features:

Fully automatic measurement, no manual involvement required during the measurement process

Adopting imported pressure regulation module, with good voltage stabilization effect

Equipped with automatic sampling function, the measurement frequency and spacing can be freely set

Single point measurement time for samples of the same specifications is less than 10 seconds, improving testing efficiency

Pneumatic clamping of samples saves time and effort, with consistent clamping force and better sealing

Anti pinch design for safer operation

Vertical structure, LED observation light, convenient for observing samples

Adopting a 12.1 'industrial grade touch screen and a flat operating interface

Automatic and manual measurement modes

CU, ml/min multi unit display

Automatic statistics of maximum value, minimum value, average value, standard deviation, and coefficient of variation

Automatic data storage and automatic memory upon power failure

Equipped with a micro printer and network interface for data transmission

The core components are all sourced from well-known manufacturers with low failure rates and long service life

The software has multi-level permission management, audit tracking and other functions (optional)

Testing principle:

Under a certain pressure, clamp the measured sample in a suitable measurement position and measure the total airflow passing through the surface of the measured sample.

Reference standard:

ISO 2965, YC/T 172, GB/T 12655, JJG (Tobacco) -1998

Test application:

Basic application - suitable for breathability testing of cigarette paper, filter forming paper, and filter attachment paper

Extended application - suitable for breathability testing of materials with directional breathable belts

Technical Specifications:

Instrument model: C180M

Test range: 0-20000 Coresta; 0～40000 mL /min

Resolution: 0.1 Coresta

Pressure range: 0-2 kPa

Pressure accuracy: ± 0.25% FS kPa

Measurement spacing: 30-999 mm

Test chamber: 1 set

Test area: 2cm2 (2cm x 1cm)

Sample size: ≥ 3cm × 3cm

Sample thickness: ≤ 3mm

Gas specification: Dry air (self provided gas source)

Gas source pressure: 87PSI/600kPa

Interface size: Φ 8mm polyurethane pipe

Dimensions: 47cm × 47cm × 45cm

Power supply: 120VAC ± 10% 60Hz/220VAC ± 10% 50Hz (choose one)

Net weight: 25kg

Product configuration:

Standard configuration: Host, 12.1 'touch screen, mini printer, power cord, Φ 8mm polyurethane tube

Optional parts: Computer, software, air compressor, CFR21 Part 11, GMP computer system requirements

Note: The compressed air inlet of this machine is a Φ 8mm polyurethane pipe (pressure 87PSI/600 kPa); Self provided gas source