The maintenance methods of ultrafine grinding vibration mill mainly include the following aspects:
1. Daily cleaning:
External cleaning: Regularly use a dry cloth or brush to gently wipe the external surface of the ultrafine grinder, remove dust and dirt, and keep the equipment clean.
Internal cleaning: Regularly clean the crushing chamber by mixing acid and alkali or using specialized cleaning solutions. Pour the cleaning solution into the crushing chamber, let it sit for a period of time, and rinse it off with clean water. Be careful not to let water directly enter the electrical part.
2. Inspection and replacement of vulnerable parts:
Regularly inspect the wear of vulnerable parts of the crusher, such as grinding beads, grinding discs, bearings, blades, hammers, screens, etc., to ensure that they are in normal condition. Parts with severe wear and tear should be replaced in a timely manner to avoid affecting the crushing effect and overall performance of the equipment.
3. Lubrication system maintenance:
Regularly check whether the lubrication system of the ultrafine crusher is normal, including whether the oil level is sufficient, whether the oil meets the requirements, and whether the oil pipe is damaged.
Regularly add clean lubricating oil and ensure good sealing. The bearings of the ultrafine crusher bear all loads, so good lubrication is required.
4. Equipment operating environment and maintenance:
Maintain a stable operating environment for the equipment and avoid excessive vibration and friction. At the same time, avoid using materials that are too hard to prevent the equipment from being subjected to excessive impact and damage.
During the production process, the temperature of the machine body should be checked regularly. If the temperature rises above 50 degrees Celsius, the machine should be stopped and rested for a while, and then processed after cooling down.
5. Safety operation and maintenance standards:
Operators should be familiar with the performance, usage requirements, and operating procedures of the equipment, and strictly follow the equipment usage specifications for operation.
When cleaning and maintaining, be sure to turn off the power of the equipment first to ensure safety. At the same time, operators should wear protective equipment to avoid injury.