Dental Material Thickness Tester (YKT-CH01)It is a high-precision instrument designed specifically for measuring the thickness of dental materials, widely used for thin film thickness testing of dental restorative materials, cement, polymer adhesives, and other materials. The core testing principle is based on mechanical contact measurement, combined with high-precision sensors and automated control systems to ensure the accuracy and reliability of measurement results.

Dental Material Thickness Tester (YKT-CH01)Detailed explanation of testing principle

1. Initial measurement: Firstly, the tester will measure the thickness of two optical glass plates in close contact and record the initial reading A. This step is to ensure the reference thickness of the instrument without material interference.

2. Material placement: Mix the dental materials to be tested and place them on the lower glass plate. The material needs to reach a stable state within a certain period of time to ensure measurement accuracy. Apply pressure: vertically towards the center of the specimen through the upper glass plate

Apply a force of 150 ± 2N and maintain it for a certain period of time. This step ensures that the material fills the space between the two glass plates, avoiding the influence of bubbles or gaps on the measurement results.

4. Final measurement: After the material is filled, the instrument will automatically measure the total thickness of the two glass plates and the sample film, and record it as reading B.

5. Thickness calculation: The actual thickness of the film is obtained by calculating the difference between the initial reading A and the final reading B. This process is automated, reducing human error in operation.

Advantages of high-precision sensors

The YKT-CH01 dental material thickness tester adopts high-precision sensors imported from Sanfeng, Japan, with an accuracy of 0.1 μ m, ensuring the repeatability and accuracy of measurement results. In addition, the instrument is equipped with an embedded high-speed microcomputer control system that can display real-time analysis data such as maximum, minimum, and average measurement results, making it convenient for users to make quick judgments.

Meets multiple standards to assist in industry quality control

The testing instrument developed by Zhongce Electromechanical strictly follows multiple dental material testing standards, such as YY 1042-2023, YY0271.1-2016, YY0272-2009, etc., to ensure that the measurement results comply with industry standards. Through this precise testing principle,YKT-CH01 Dental Material Thickness TesterProvided strong support for the research and quality control of dental materials.