The circular tablet press is a dual pressure automatic rotating, continuous tablet press machine that compresses granular raw materials into tablets. It is mainly used for tablet production in the pharmaceutical industry, and is also suitable for industrial sectors such as chemical, food, and electronics.
The maintenance and upkeep methods of the circular tablet press mainly include the following aspects:
Daily cleaning and maintenance:
External cleaning: Use a damp cloth or sponge to gently wipe the surface of the tablet press, avoiding the use of chemical cleaners or strong solvents to prevent damage to the equipment surface.
Internal cleaning: Open the side panel or cover of the machine, use a soft brush or vacuum cleaner to remove internal dust and debris. For areas that are prone to oil stains, use professional cleaning agents for cleaning, and reinstall the filter screen and cover.
Special component cleaning: Clean the grease and impurities on gears and other moving parts to ensure that they are not damaged, and lubricate them with specialized lubricating oil.
Regular inspection and replacement:
Mechanical inspection: Regularly check the rotational flexibility and wear of components such as worm gears, worm gears, bearings, pressure wheels, upper and lower guide rails, and promptly repair or replace damaged parts.
Hydraulic valve and oil tank: Regularly clean the hydraulic valve and oil tank, check or replace the sealing ring and filter element.
Oil replacement: Regularly filter or replace the oil to maintain its cleanliness.
Maintenance after use:
Cleaning residual powder: After use, remove the remaining powder and scrub the residual powder in various parts of the machine, increasing the cleaning frequency to deal with powders with high viscosity.
Shutdown maintenance: If the tablet press has been out of use for a long time, the die should be removed, all parts of the machine should be wiped clean, rust proof oil should be applied, and a dust cover should be put on.
Environmental control:
Placement environment: Place the tablet press away from the earthquake source, in a dry and well ventilated place, avoiding direct sunlight and moisture.
Temperature and humidity control: Ensure that the temperature and humidity in the room are appropriate to prevent mold rusting.
Electrical maintenance:
Electrical component inspection: Regularly check the operating status of electrical components to maintain good insulation and stability. The maintenance of electrical components should be carried out by professional technicians.