The working principle of the swing pellet machine is driven by a motor, a V-belt pulley, and a worm gear. Under the action of an eccentric crankshaft and a lifting rack, the seven angle rolling cutter on the gear shaft rotates back and forth periodically. The material continuously moves and is controlled by the gap between the sieve and rotor to extrude particles. Its production capacity varies with the moisture, type, viscosity, and mesh size of the material, and can produce particles of various specifications. When crushing dry materials, the solidified block shaped materials are crushed by collision in a drum made of a seven angle rolling cutter, and the dry materials are forced to pass through a sieve.

Characteristics of Swing Granulator:

1. Compact and beautiful, lightweight, durable, and can be moved freely;

2. Ultra high speed motor design, high fineness of medicinal material crushing (most medicinal materials have a fineness of 50-300 mesh), wide crushing range;

3. Fast speed, the crushing time of traditional Chinese medicine generally does not exceed 3 minutes, and the crushing time does not exceed 3 seconds.

4. Clean and hygienic, with no dust generated during work. The grinding tank and blades are made of stainless steel, which meets the iron free requirements of many traditional Chinese medicines.

5. There is basically no loss of materials, and the machine is easy to clean; Crushing different medicines will never mix colors or flavors.

6. Easy to operate, personnel do not require specialized training.

Maintenance and upkeep of the swing pellet machine:

1. Regularly inspect the machine parts, once a month, to check whether the moving parts such as worm gears, worm gears, bearings are flexible and worn. If defects are found, they should be repaired in a timely manner and not forced to be used.

2. The swing pellet machine should be placed indoors in a dry and clean environment, and its atmosphere should not contain acids or other corrosive gases that can flow through the parts.

3. After each use or shutdown of the swing pellet machine, the rotating drum should be removed for cleaning or brushing the remaining powder in the hopper, and then installed properly to prepare for the next use.

4. If the machine is not in use for a long time, it must be wiped clean all over the body, and the smooth surface of the parts should be coated with anti rust oil and covered with a cloth.