Ozone disinfection machine is a device that uses ozone gas for disinfection. Its principle is to spray a certain concentration of ozone gas onto the disinfection site. Ozone gas can kill bacteria and viruses in the air. Ozone disinfection machines are usually composed of ozone generators, ozone transfer tubes, and ozone spray heads. Different products have different details, but the overall principle is similar.
Operation method and precautions of ozone disinfection machine:
1. Preparation work
Before using an ozone disinfection machine, the following preparations need to be made:
(1) Determine the disinfection site and choose the appropriate ozone disinfection machine based on the size of the site;
(2) Check if the machine is running normally, clean the ozone transfer pipe and spray head to ensure smooth operation;
(3) Install and connect the ozone transfer pipe and spray head:
(4) Set a reasonable ozone concentration and time based on the scope and duration of use.
2. Operation steps
After completing the preparation work, follow the steps below to proceed:
(1) Place the ozone disinfection machine in the disinfection area, and set the position of the transfer pipe and spray head according to the area and layout of the place;
(2) Start the ozone disinfection machine and operate it according to the concentration and time settings set earlier;
(3) When the ozone generator is working, there should be no people or animals in the area. The disinfection site should ensure that the doors and windows are closed and the room is sealed to prevent ozone gas from leaking out
(4) After the operation is completed, wait for pressurized deoxygenation and ventilation.
(5) Open the window and use a damp cloth or water spray to deodorize the relevant equipment.
3. Precautions
When using an ozone disinfection machine, the following precautions should be taken:
(1) Before operating the ozone disinfection machine, it is necessary to carefully understand the user manual to ensure correct use;
(2) When operating the ozone disinfection machine, personnel are strictly prohibited from entering the disinfection area to avoid poisoning:
(3) During the operation, it is necessary to turn on the ventilation equipment to ensure that the room is well ventilated. After the operation, it is also necessary to wait for pressurized deoxygenation and ventilation;
(4) Contact the manufacturer for after-sales service and maintenance.
(5) During the operation, it is necessary to observe at all times to ensure the normal operation of the equipment. If there are any abnormal situations, the after-sales service personnel should be contacted in a timely manner.