Electro hydraulic servo fatigue testing machine

1Introduction:

The electro-hydraulic servo fatigue testing machine (testing system) is a specialized testing equipment, and its configuration and structural form vary according to different application scenarios. In the development process of our company's dynamic and static fatigue testing machine (testing system), based on the development and manufacturing experience of Bocai International Electro Hydraulic Servo Dynamic Testing Machine Company, combined with the usage habits of domestic users, we adoptedThe development concept of "unitization, modularization, and standardization" has achieved the purpose of "providing domestic users with dynamic fatigue testing machines with higher cost-effectiveness". The key supporting components of the equipment are selected from similar international and domestic products. According to the requirements of the test object, suitable servo controllers, servo valves, and key components of the hydraulic system are selected, which not only ensures the stability and reliability of the system, but also greatly improves the cost-effectiveness for user applications.Our aim is to provide customized testing systems for our customers!

The electro-hydraulic servo dynamic and static testing machine is mainly used for dynamic and static mechanical performance testing of materials and components, including tensile, compressive, bending, low cycle, and high cycle fatigue testing of materials and components. By configuring corresponding accessories and testing software, it can be used for crack propagation, fracture mechanics, and other mechanical tests of various materials. Widely used in material testing fields such as aerospace, shipbuilding, scientific research institutes, enterprise new product development, and enterprise product testing.

IIEquipment full name: Microcomputer controlled electro-hydraulic servo dynamic and static testing machine

IIIModel:DST 1211

（1 single channel 2 Two pillars 5(1=1/2t 2=5T 3=10t 4=20T 5=25/30 6=50/60t) 4System traffic encoding 1 36L 2 45L 3 70L 4 90L 5 110And above)

5.1 Static test force: ±50kN， The entire process is not graded, within the range of 1-100%, with an indication accuracy of ± 1% starting from 20%.

5.2 Dynamic test force: ±50kN， The amplitude fluctuation shall not exceed ± 2% FS, in accordance with the Technical Conditions for Tensile and Compressive Fatigue Testing Machines (JB/T9397-2002).

5.3 Amplitude of actuator:±50mm，Indication accuracyStarting from 20% ± 0.5% FS.

5.4 Frequency range: 0.01-30Hz.

5.5 Speed:500mm/s(21Mpa,20L/min)。

5.6 Controller type: single channel, displacement and force closed-loop channels.

5.7 Main test waveforms: sine wave, triangular wave, rectangular wave, oblique wave, etc.

5.8 Test Space: Height 950mm, Test Width500mm。

5.9 Host stiffness: 2.5 × 10⁸ N/m。

5.10 Clamping range of circular specimen: φ 5—φ25mm。

5.11 Host weight: 1000kg

1Equipment Configuration List